Archive for the ‘Penny Fee’ Category

Sailing Fee-Fi: Part 2

September 11, 2018

We are members of the Traditional Small Craft Association, a really interesting group for anyone interested in small boats. Our focus for the last couple of decades has really been with larger boats, but this year we decided to try something different and signed up for the Small Reach Regatta. For those not familiar with the SRR, it is not a regatta but more of a Maine take on the small boat “raids” that are so popular in Europe. Many small boats get together and decide on a destination for the day determined by weather and the size of the fleet, then sail, row, or paddle to that destination for lunch on a beach and return to the starting point after lunch and social time on the beach. The social time is continued at the campground used as a base for the fleet at the end of the day.

wvt0bf2ynol6pkiw3yv4sc3yk1z7qi5r

Pond Island lunch stop.

We thought it would be fun to bring Fee-Fi to the event and sail her with the fleet, and despite one rain day and two that included some fog, it was a lot of fun. The array of different small craft was amazing, a totally different experience to watching a fleet of sailboats that are all of the same class, this was more like stepping back in time when sail or oar were the only means of propulsion for small boats.

e8jxcu2yblvanex9hfc2ilmliegww4uf

Fee-Fi in the 2018 SRR.

The event was great fun and challenging since, though Fee-Fi has always provided basic launch service under oar or sail for us and our Friendship sloop, we had not used her before as our main mode of transport over distance. It was a different experience and a really enjoyable one.

55pfm8g4b32u3il6byouyd21u9b9beud

Some of the fleet heading to Naskeag Point.

4iwxqmzj77xuo53cmxnfhuz851rn0izk

Naskeag Point at the edge of the fog.

For us, anyway, mingling with other small boat sailors was almost as much fun as the actual sailing.

The three day event was sponsored by the Down East Chapter of the TSCA who did a terrific job as hosts despite the unfavorable weather.

Advertisements

Sailing Fee-Fi: Part 1

September 6, 2018

I have not followed up in a while with developments with our sailing tender Fee-Fi the Penny Fee design that we built to move us to and from the Friendship sloop, but she has gotten a lot of use in the last six seasons.

As I have written before on this site, both the rig and the interior layout are departures from the excellent set of plans provided, by Iain Oughtred, but we needed a simple, self contained boat to serve as launch and tender with as few spars and odds and ends to clutter the boat as we could manage. So we made changes that allow us to keep safety gear on the boat at all times and still allow us the maximum amount of room for cargo and passengers. I think she might go to weather slightly better with the yawl rig suggested in the plans, however, we needed closed storage aft where the mizzen would have been and that would have meant more spars and more pieces.

The big advantage to the sprit rig is that the sail can be furled by one long pull on the brailing line. The brailing line collapses and bundles the sprit and sail up against the mast. This allows us to sail right up to the mother ship and furl the sail in one smooth movement with minimal fuss. It also means that should the wind die completely, the sail can be brailed up and we can row without having to strike the sail. Should the wind reappear, we have only to let go the brailing line and we can sail again.

 

Here is a quick video that might give a better idea of what kind of performance we get from her under sail.

 

Summer 2016

November 16, 2016

Well Labor Day has come and gone and so has Halloween, we pulled the fleet out of the water and started winter layup in September,  a little early this year so we could continue renovations on the cottage that the two tortoiseshell cats own.

First a word about sailing this summer; wind.

The summer of 2015 was a light air summer, as a result we got very good at setting and striking topsails. By contrast, this year we only set topsails twice all summer. We joined four other Friendships, a Marconi sloop and a lobster yacht for a two week cruise in July and never needed diesel, and never even topped up the main tank from our reserve tanks. It was a fantastic cruise with good company, good cheer, and great sailing.

mvb7dg2tpiho64nnhrlrb7ijkvu5km04

Sailing in the company of Friendships.

Not only was there wind but also we were incredibly lucky in that we had predominantly fair winds. We had one rough day of high winds and big seas getting into Southwest Harbor on MDI. And there were two days on our cruise when the winds blew 25-30 kts, and not from a favorable direction, but we spent those two days tucked up snugly in a hurricane hole, hiking, reading, and relaxing, and those days proved to be among the most relaxing of the trip.

zd7i24rg8wckekj95frkke4rbf7herxp

Moonrise in a hurricane hole.

We spent the last few days of our cruise in Rockland at the annual Friendship Sloop Homecoming and gathering.

14yzgdrntcg3wjgo32q5x9yd8p5h3blc

Friendship sloops in Rockland 2016

We had a great time gathering with other Friendship sloop owners and fans in Rockland.

ocfm0qzirw3owhgirz9kitkp68prglro

At the dock in Rockland, I don’t know why John is staying on the dock…

While we were in Rockland we also had a chance to take some of our extended family sailing. There were so many of them they had to come sailing in shifts.

zwdu4c2krcd8mc691q4wc6elo89t156c

Sailing with family…do I look worried?

After returning from our cruise we had another six weeks of weekend cruises, some of them extended weekend cruises, and great sailing.

The winds were so consistent and fair, that we did not get out to sail our tender, Fee-Fi nearly as often as last year since we never wanted to miss a chance to take out the Friendship.But even there, when the time came to pull Fee-Fi out of the water, we managed to sail to the take-out ramp in two long tacks, which was a delight since it is usually an hour of hard rowing.

Our lives have been so very full this last year or so that at times we wonder if it makes sense for us to dedicate so much of our time and energy to our wooden classic, but we saw so many beautiful boats, and old and new friends on the water and our summer was so rich an fulfilling that we mostly feel fortunate and grateful for what we have and what we are able to share.

New steering for the launch

August 5, 2014

We have been pretty happy with our Iain Oughtred designed launch, but now that we have sailed her for a couple of seasons we are trying to refine the few things we don’t like, or did not get right on the first go-round. One of those things was the tiller.

Initially I opted for a very traditional tiller. I liked the simplicity of the design and the classic look. However, what we found is that the traditional tiller had some traditional limitations due to how we use the boat. One has to do with sailing; if you are sailing the boat you need to push the tiller very far to port or starboard when tacking. This requires that the helmsman move his or her body all over the place just to tack the boat. This becomes even more problematic if you are single-handing because the excessive movement aft lifts the bow out of the water making the boat less able to windward.

The other issue has to do with taking passengers. The boat will comfortably hold five adults, except that anyone sitting aft has to deal with the sweep of the tiller and the dance of the helmsman.

None of this is totally unexpected, but it has become more annoying than we were prepared for.

What we ended up doing was to go back to the design source. 

Iain Oughtred has another design, the Caledonia Yawl, similar in size to the Penny Fee, with a push-pull tiller arrangement that frankly did not look that great to me on paper. However, I ran into a video of the tiller set up on Off Center Harbor and was totally swayed. I conceded (at least to my self) that it would not look as elegant and simple as the original tiller we had, but to my surprise, I found that the new design, while less classic, has a simple functionality that is also quite elegant.

Another advantage to the new system is that we made the tiller longer than the original so that if you are taking the boat out for a sail by yourself you can sit more forward, almost in the center of the boat which makes the boat balance beter.

It takes some getting used to and the instinct from long time sailors is still to move the tiller from side to side instead of fore and aft, but after taking it for a spin under sail and oar, I find that it is a really neat solution to our previous problems.

We had to come up with a way to lash the tiller when we leave the boat at the float, and that has not been a perfect solution, but we are working on it and that is a small wrinkle to work on.

Now I need to get back to work on the new sail. I am convinced that moving the center of effort aft, even a foot will create less drag in the rudder tacking and may gain us a few more degrees closer to the wind. We shall see.

Summer 2013

August 5, 2013

Where has the time gone?

In the last post, way back in April I was explaining how we had refinished the gaff for our Friendship sloop.

Finished Gaff

Well we got that done, and then went on to do the annual scraping, sanding, and painting and varnishing.

Spring Painting

While this was going on I tracked down and bought a used trailer for the Penny Fee and refurbished that. We had been using the spar trailer to move the Penny Fee, but it is rally too small and was stressing both the trailer and the boat.

Next I installed a pump in the Penny Fee so that when we return to the boat after a week of rain we don’t have to bail.

Finally we got to launch the fleet in mid-June.

We got in two short weekend cruises before things got into full swing. The weather on one of those weekends was simply fog. Although we did get out we ended up sailing the Penny Fee more than the sloop. The other weekend, the one following the 4th of July was ridiculously hot, but it was not without its moments. We did some sailing and some swimming off the boat and while cooling off we watched large power boat run right up on a well charted ledge in broad daylight right in front of the US Coast Guard station. We could not believe our eyes, but at least we were not bored.

Oops

In mid-July we headed out to spend some serious time on the water. First we drove to Southwest Harbor, Maine to crew in the Friendship sloop rendezvous there.

Start of the Southwest Harbor race

Great time, lots of fun people and beautiful boats.

Friendship Sloops in Southwest Harbor

Southwest Harbor Race

More from Southwest Harbor

 

Eden at Southwest Harbor

Next, on to Boothbay to pick up our boat and head to Rockland for the annual Friendship sloop gathering there. We had some fantastic sailing getting there, but once there it was just too hot.

Us running downwind to Rockland. At this point the camera broke and we were only able to take pictures without a viewfinder or screen.

Then off to spend a night in Rockport, Maine, followed by a lovely sail down East Penobscot Bay surrounded by ten schooners and a ketch, followed by several days on the Eggemoggin Reach before heading west again.

Hegira in Pulpit Harbor

All in all a fun cruise but exhausting, and now we are back to our jobs and trying to catch up.

The Fleet Is In

September 28, 2012

After what seems like the busiest summer yet, our fleet is home again and we are starting the chores to get all of our boats ready for winter. This includes fresh bottom paint, winterizing the diesel on the Friendship Sloop, cleaning and stowing sails, cushions, pillows, and mattresses, packing up the galley, and most importantly making lists of repairs that need to be done over the winter.

Typically, once the boats are bedded down for winter, they are allowed to rest for at least a couple of months while we focus on the autumn chores  at the cottage,  and then the winter holidays. Come January and February, though, I know I will start thinking about winter boat projects that need to be done before spring-cleaning and painting begins in earnest. Having made a list in the fall saves time and helps push the process along.

When we built the shed it seemed huge—much larger than it needed to be—and I remember wondering if we had not gotten a bit carried away. Now, twelve years later, part of the autumnal ritual of putting the boats to bed is the process of figuring out how to get everything into the building and still leave enough room to move around.

I know I will enjoy puttering on projects in the boat shed over the next six months, almost as much as I enjoy being on the water. And there is something very satisfying about putting all the bits and pieces away, making sure everything is tagged or labeled, sometimes adding a shelf or box somewhere in the shed so that another piece of gear can have a better place to winter over. Like stacking firewood, the process of putting things away, brings a sense of order to what is usually a frantic end-of-season rush, and a knowledge that I will benefit later from the work I do now.

For the moment though I am taking a deep breath and savoring the fact that the boats ate all back safe and sound in the boat shed.

The leaves have begun to change colors, the equinox has come and gone, the boats are in the shed: autumn is here.

New Boat Part 22

August 13, 2012

Observations:

Before I continue with the building of mast and sail for our new Penny Fee, now called Fee-Fie, (the dinghy has become Foe-Fum), I wanted to record some observations on the performance of the boat thus far. We have had the boat in the water and have been using her for about three weeks. We have used the boat to ferry loads to and from the Friendship sloop, and have towed it to Rockland from Boothbay and back, and have basically rowed it around a bit. As of this weekend we have been sailing it too, but I will save my observations on sailing qualities for the end of this post.

Penny Fee: Fee-Fie

Towing:

The first surprise was how easily she tows behind the Friendship Sloop. She is heavier than our dingy, but she also has a much longer waterline and appears to sit high in the water when unloaded. She also tracks well, partly due to the longer waterline and partly due to the lap-strake construction.  The result is a longer heavier boat that does not squat down in the water behind our sloop but that slips along with less resistance than I would have imagined. Part of our trip back from Rockland was in 5 to 8 foot seas with 15-25 knot winds. We found that in every condition except heavy following seas; this is a very well behaved boat. In following seas she tends to surf and surge and a long towline and a watchful crewmember to tend the towline is advisable.

Rowing:

We have noticed that when under oar power it is more comfortable to sit on a seat cushion that raises up the rower about 2 ½”. I don’t think that this is the result of the benches being placed low, either by the designer or in our construction, but rather that we deliberately raised the height of the oarlocks so that the oars would be less prone to rub on the fender of the boat. She does take more back power and a longer stroke than the dingy to propel, but she carries her way beautifully and once moving is easy to keep moving. The other aspect that will take some getting used to is that she rows a little easier with a load rather than without. This is both the opposite of our dinghy and is also a bit counter-intuitive.

Stability:

Another impressive feature is the stability of the boat, it has greater secondary stability than I would have imagined and, in some ways this drove us to make the sail because we wanted to see how she handled the pressure of the sail and how that effected the stability. We have experimented by having a helmsman stand in the back of the boat and steer with the rudder while the rower provides the power from the front bench. Our experience is that she provides a stable platform for the helmsman, to say nothing of the fact that it is just plain fun to stand in the back of the launch and con the boat.

Now on to the last pieces of construction:

The Mast:

I bought two pieces of 2”x 8” spruce stock that were not flawless but that had long, relatively clear sections in each. I got them at the local home center, total cost was about $20. I then ripped out the two best sections and using a dato-blade on the table saw cut a ¾” channel in each that started a bout a foot below the truck of the mast and ended about a foot above where deck level would be. Then the two halves were glued together giving me essentially a mast blank with a hollow core.

The two mast halves with dato ripped

The two mast halves glued together

When the glue was dry I cut a taper using the table saw so that I had a long, tapered, spar that was square in cross section. Next step, cut off the corners of the square so that the spar becomes eight sided, and then move to hand planes to make the mast round in section.

Mast with taper cut and corners cut off to make a long octagonal spar

Spars varnished and ready for hardware

The sprit is made of solid spruce about 1 ½” in diameter, shaped in the same way that the mast was shaped.

The mast has four, unfinished teak cleats; one each for halyard, brail, snotter, and downhaul. There are two heavy cleats set inside the gunwale, port and starboard aft, for the mainsheet. These too are made from unfinished teak. My experience has been that cleats do not hold finish, due to lines running around them, they are also a pain to keep finished. Raw teak weathers well and always looks pretty good without much care.

Cleats on the mast

Building the sail:

We used as a reference the excellent Sailmaker’s Apprentice, although sailmaking is not new for either me, or the woman who will willingly get up in the middle of the night and stand an anchor watch. It is also worth noting that first, the sprit sail is one of the easier and more forgiving sails to make, and second that we are using canvas that we were given free, so, in many ways this is a prototype sail and we might make a more durable version once we have learned all we can from the performance of this canvas model. On the other hand if this sail works, why fix it?

The sail is made of four panels and will take its shape partly from the cut of these panels (particularly the two closest to the mast) and partly to a slight curve built into the luff of the sail. A bolt-rope is hand stitched along the head, luff and foot of the sail to help minimize the stretch in these sections of the sail. We used 3/8” brass grommets for the reef points and the robands on the luff of the sail, and the brail-line grommet in the leach of the sail. The rest of the sail hardware is sewn in by hand. The thimbles and metal rings are all solid brass.

The building process:

One thing we did that made the whole sailmaking process much easier was to recycle the boatbuilding table and use it as a sailmaking table. All we did was cut the table in half into two eight-foot sections. This allowed us to either push the sections together and make one long table to lay out panels and pin seams and that kind of thing, or we could pull the two apart and put the sewing machine in between them and pass the sail from one surface to the other over the sewing machine table. If we were making a larger sail I would have raise the levels of the tales to the same level as the sewing machine table, but with a sail that is only 85 square feet it seemed unnecessary.

Work table with sewing machine in the middle, sail in the foreground

The sail took about two weeks to build working in the evenings and in what free time we have, but I would not want to be misleading about this. As I said before both the woman who will willingly get up in the middle of the night and stand an anchor watch, and I have sailmaking experience, added to which I have a fairly comprehensive collection of sailmaking tools and supplies on hand. It would be a different story if we were having to figure out each step from scratch and then purchase the appropriate tools, materials and hardware. As it was there where plenty of choices to make regarding where to put in grommets, cringles, and thimbles.

Details of the sail showing the hand-sewn hardware at the clew and head

Anyway the finished sail looked great, the question was how would it perform in collaboration with the Penny Fee? The short answer is: far better than I expected.

Penny Fee under sail

This shot shows the boat well

Sailing in light air

There is a tendency to make leeway with very light air, but that disappears when there is any real wind. The boat points higher than I thought it would and virtually flies downwind. Beam reaching it is remarkably stable. The other factor that I love about this rig is how easy it is to haul on the brailing line and collapse the sail and sprit against the mast. It was really fun to sail right up alongside the Friendship sloop, touch the side, and collapse the rig by pulling on one line.

Sail brailed up against the mast

The two aspects of the rig that I question at this point have to do with the mast and the foot of the sail. I went to great effort (explained above) to make the mast hollow and light, it now appears that that was not necessary and that it may in fact be a weakness, because the mast does flex alarmingly in strong gusts. However, if the mast breaks it will be easy and inexpensive to replace. My concern about the foot of the sail is simply that now that we have seen the sail and how it takes shape in the wind, I think we could have easily added twelve to fourteen inches of length to the foot of the sail and gotten her to round up a little faster when tacking.

In both these cases, however, I am splitting hairs and speculating. The factual evidence that we have so far is that this is an easy rig to sail, to break down and set up. It brails quickly so that if the wind dies you can row without taking down the rig, and you can dowse the sail quickly when coming alongside. In short, it is everything we had hoped for and we had a fantastic fun day testing it out.

Really fun to sail

If you would like to read all the posts related to this project together, go to the category at the right called “Penny Fee” and click on it. It will pull all the posts on the penny fee onto one page for you.

New Boat Part 21

July 16, 2012

This will be a long post because while I have been writing and chronicling what has been going on in the boat shops, I have not been good about putting up posts. so now it is catch up time. First we needed to focus on the Friendship Sloop, getting her ready for the season. Then launching and rigging her and even getting in an occasional weekend cruise.

Friendship ready to move, picture taken early in June

Transport day June 10th

Then we had a little time to re-focus on the Penny Fee, we got to do some of the fun jobs. The rope fender, floorboards, rudder, and oars. I would have liked to have slowed down and tried to savor these jobs more, but then we never would have gotten the boat in the water this season.

The rope fender:

As described in an earlier post, we designed the outwale of the gunwale to have a groove or gutter running the length of the boat so that the rope that we are going to use as a fender will lie evenly along the edge of the boat. The fender is attached to the boat with stainless steel screws. The installation is fairly simple, the idea is to place a screw within the twist of the rope so that only the innermost strand is pierced by the screw and secures the rope to the outside of the gunwale. We started at the transom and worked along to the bow, around to the other side of the vessel and back to the transom again. At least that was the plan.

I had bought 36 feet of 1 1/8” rope, which should have been enough to do the job easily. I back spliced an end with almost no waste and started to attach the rope. I got most of the way down the starboard side and noticed that it looked like there was not enough rope. An optical illusion, I thought. To be safe, I felt I had better double check, I checked and found that there was not enough rope. Then I measured the rope and found that it was not 36 feet long, but 32. Oops.

Some desperate calls to Hamilton Marine, and we determined that whatever I had bought was a closeout and not a standard rope. Since they could not match it, the only plan was to replace it. They offered to do so free of charge and a new length of rope was on the way. The new rope arrived in 48 hours, and I have to say that the customer service at Hamilton Marine was excellent. I had found that to be true in the past, but when things go wrong it is always nice to find someone who is going to go out of the way to help you out. Anyway, removing the fender we had already installed took a lot of time and then the screw holes had to be filled. Still, in all the new rope went on fast (under two hours) and looks great.

Rope fender in place

Oars:

We started the oars back in March, but we simply did not have a great deal of time to work on them until recently. All we did was to glue up spruce blanks that were oversized oars. Then we simply shaved the first one down until it was the shape and weight that we wanted. Once we did this it was only a question of whittling down the second oar to match the first.

One oar shaped and the other still in the rough

Matched pair

The oars are quite long (9 foot 6 inches), we decided to leave the loom of the oar above the oarlock position square in section to act as a bit of a counterbalance to the long outboard section of the oar. The oars will be painted to minimize the amount of maintenance that they will need each year. Varnish looks great, but is more of a challenge to maintain on oars.

Oars painted and waiting for their leathers

Floorboards:

This is an area of the boat that we wanted to keep simple. 1”x4” pine boards were a relatively inexpensive option, we have been cutting and shaping them so that they lie on top of the floor-timbers and are fastened to cross-pieces of 5/4” pine with bronze screws, countersunk and bunged. The floorboards will get no sealer and will be allowed to weather naturally. The end result should meet our needs, were quick to assemble, and require little or no maintenance.

Floorboards

The centerboard pin:

A very important piece that sometimes gets overlooked in the rush to launch is the centerboard pin. In our case a piece of 3/8” bronze cut so that it is short. In other words, it is recessed about 3/8” from each side. This leaves plenty of pin to do the work, but it also leaves a space to squirt caulking goop. The goop is covered by a rubber gasket, and that is capped with a bronze plate that is held in place with four screws.

The hole for the pin, with the pin in place, the rubber gasket (red), and the bronze cap-plate

The goop has been squirted into the end of the hole with a caulking gun

Bronze cap in place

The Rudder:

The plans for the boat came with two options for the rudder. One was a traditional wooden rudder, and the other was for a kick-up rudder made of wooden parts. Unfortunately for us, neither of these designs will exactly meet our needs. We do need a kick up rudder, but we need something that will need less maintenance than the one provided in the blueprints. That design is also a bit more complicated than I would like, and requires some hardware that I was not sure I could find in the limited time I had before launching. So I set about pulling together a kick up rudder design of my own, one I could put together with some off-the-shelf hardware, and one where the lower section of the rudder (the kick up part) is made from a single plate of 1/4″ aluminum.

Design showing rudder down

Design showing rudder up

The rudder design is still not what I would call simple, but the dinghy dock is only in about two feet of water at low tide, and we intend this boat to take us ashore on rocky Maine islands, so a kick up rudder is necessary. The top section of the rudder is glued up from three pieces of plywood, the middle piece is slightly thicker than the aluminum plate. This middle piece of plywood is cut in such a way that it not only provides space for the aluminum bottom plate to pivot, but it also provides stops for the up and down position of the lower section of rudder. The weight of the aluminum  section of the rudder will keep it in the down position unless it strikes a submerged object, then the lower section can kick up. A manual line and jamb-cleat on the trailing edge of the rudder allows for locking the lower section of the rudder into the “up” position for extended periods, like when the boat is beached.

Bottom part of rudder with cardboard template.The aluminum was cut with a saws-all and a metal cutting blade. Then hand filed.

Finished rudder in down position

The launch:

Before we trailered the boat to the coast I wanted to launch her here at our local pond where all of the boats we have built have been launched. On a lovely summer evening we sprinkled some hard cider over the bows, slipped her off the trailer, and went for a row. I was too busy checking to make sure there were no problems, but there were not, and as I slowly relaxed, I realized that this was a delightful boat. Stable, she caries her way well, although she does make noise with those laps and a little chop.

The first launch

The next evening we brought the boat over to the sea by trailer, and launched her again, this time in salt water.

Sitting in salt water

The new tender

We need to use her more before we have any real idea what her performance will be like. We will tow her with us to the Friendship Sloop Gathering in Rockland this week, and we will find out how well she tows, then I need to finish the mast, sprit, and sail. Can’t wait to get a sail on her.

If you would like to read all the posts related to this project together, go to the category at the right called “Penny Fee” and click on it. It will pull all the posts on the penny fee onto one page for you.

New Boat Part 20

May 4, 2012

The hull is done….

Basically we have a little more varnish to do on the transom and we need to seat the centerboard and pivot pin and install the rope fender. For now though we need to shift gears to the Friendship sloop. We have been going over the rigging and the blocks and will soon start the yearly varnishing and painting. When that is done we will return to the Penny Fee. At that point we will be working mostly on accessories.

The finished hull. Look carefully and you will see standing rigging for the Friendship sloop hanging around the shop as we mend the service, redo the blacking and, and overhaul leathering.

Blocks for the Friendship getting an overhaul.

It will then be time to go to work on the oars, rudder, finish the centerboard, make up floorboards, attach hardware, look at making up some spars and a sail.

Gee other than that we are done.

In the meantime, here are some pictures of the finished hull all painted and nearly ready for those last touches and accessories.

If you would like to read all the posts related to this project together, go to the category at the right called “Penny Fee” and click on it. It will pull all the posts on the penny fee onto one page for you.

New Boat Part 19

April 24, 2012

More painting and the foredeck

With the benches in and the hanging knees in, the main job was painting.  Working in two shifts, we managed to get three topcoats of paint on the entire interior over a week. Each day I would go to the shop early and either do some painting, or more often some prep-work. Then, in the evening after work, we would paint for an hour or so.

Two other projects were going on at the same time; I have been trying to get the centerboard finished up, and getting the foredeck finished.  The foredeck was a design change of my own and was based, originally on three factors. The first factor is that I don’t like and never have liked open bows. The “V” shaped bow area of a small boat is a place where ankles get twisted and people lose their balance; a foredeck largely eliminates this factor. The second factor is quite simply that we want to have storage space and the space below the foredeck will meet this need. The third factor was that when we started this boat, our ship’s wolf, Saxon, was having more difficulty getting from the dinghy to the deck of the Friendship. The foredeck was intended to give her more height and a better, more stable place to stand and jump for the boat. Since she passed away, this factor no longer applies, but it was an important element, when we were making our original design choices.

The foredeck will be installed as one panel, and creating that one panel by laminating pieces together and then shaping it so that it fits snugly where it will be installed has taken a lot of time and head scratching. With any luck I will make the last adjustments and prime it over the next few days.

Dry-fitting the foredeck

The centerboard has been difficult only because of the many coats of epoxy, 4oz fiberglass cloth on the leading edge, and subsequent paint. It is just one of the projects that to date has had eight gluing sessions, three paint sessions, and will have six more paint sessions before it is complete, and the end result will just be a single piece that has a hole in it on which to pivot. It gets more complicated because after four fittings to make sure that the centerboard fit correctly when I went to check it a fifth time, it did not fit. The combination of layers of paint, epoxy and fiberglass has added enough thickness to cause the centerboard to jam. So, I have had to start sanding and removing layers and veneers on the centerboard, and then we will have to start the painting again.

Despite this annoying delay, the painting continues and the foredeck will get glued in this week with the caps for the centerboard well. At this point in the project, it is hard not to work on it. A few minutes spent looking at and enjoying what we have created makes me want to pick up a tool or brush and do just a little bit more, and then a little bit more, and perhaps just this little bit more….

I think this shot and the next show off the shape of the boat well

Just a little more work…

If you would like to read all the posts related to this project together, go to the category at the right called “Penny Fee” and click on it. It will pull all the posts on the penny fee onto one page for you.